Roller shutter replacement

Roller shutter replacement

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Roller shutter replacement:

Open the shutter box, then remove the belt to be replaced, detaching it from the roller to which it is fastened; with both hands make a twist on the roller that holds the shutter and rewind it fully; using a long screwdriver or another tool, lock the raised shutter, using it as a brake. Then secure one end of the new belt to the roller shutter; remove the retainer and slowly lower the shutter, so that the belt is rolled up to the belt holder roller. Unscrew the roller holder located at the lower end of the belt and remove the old belt; then rewind the small roller in the opposite direction to that of the rolling shutter, then, holding the roller still, fix the new belt, and reposition the roller in the wall, fixing it with the screws previously removed.